Imee Group Ltd
Tel: +86-571-81763569    
Outdoor Products Entrance:www.imeechina.com
Imee Group Ltd

Imee Group Ltd Professional Printer
Cathy Chen (CEO)
Pho: +86-571-81763569,+86-571-81819201
Fax:+86-571-87641610
E-Mail: imeeprint@163.com

Skype: imeechina6868cathylchen
Addr: 7th Floor, No.99 Meiyuannanlu, Zhuantang, Westlake district, Hangzhou, ZJ ,310024, China

News
Home > News > > Content

Flyer Prints Little Knowledge

Imee Group Ltd | Updated: May 31, 2017
Source:


Leaflet printing requirements

1, leaflets to print everything to print the factory or print shop format, 16 open also points 16 degrees, 16 open, 32 open is the size of the shop to confirm

2, or the size of the problem, Flyers Printing with the print shop to confirm carefully that they will see the size of the print before you to the size of the example 214mm * 289mm is with bleeding line, the content is still within the 210 x 285, the text The content must not be more than 210 x 285,214mm * 289mm is afraid of cutting when the blank line, although the paper is 210 x 285 large, but if the content is too close to the edge, when cutting may be a variety of unexpected problems

3, the color mode must be CMYK, because it is used for printing, Flyers Printing Baidu has a lot of explanation, very detailed

4, the resolution of 300 as if we are so set, I sometimes set what 200 did not how ... ... the standard resolution is 72, but if you want to fine, then the computer with the move, set 300 the best

5, if the text does not have to change, Flyers Printing you can rasterize, you have to say that the role, but before rasterization must ensure that no mistakes do not need to change, if it is long text also pay attention to whether the two alignment, punctuation Class, otherwise you must leave the original layer yo

6, TIFF this format is not very clear amount. The We generally pass JPG just fine, not so strict = =

Leaflet printing process of small knowledge, look at our daily life in the beautiful print book is through what process to print it, on the publicity leaflets to print as an example, mainly in the following process:

Matte paper: the official name for the matte paper, observed in the sun, compared with the coated paper, not reflective. Use it to print the pattern, although no coated paper colorful, Flyers Printing but the pattern is more delicate than the coated paper, more shiny.

Cover the dumb film: is a layer of matte texture on the surface of the film. The film of the product, play a waterproof, anti-corrosion, wear, dirt and so on.

Oil: After printing, and then on the surface to print a layer of special transparent varnish. The purpose is to protect the print, waterproof, scratch and so on. Over the oil than environmental protection!

Hot silver: the appearance of a silver luster. Flyers Printing And hot silver after the region has a metal texture, the pattern is more clear, beautiful, colorful eye-catching, wear-resistant.

Spot gold and spot color silver print: print, gold and silver is handled by the spot color, that is, with gold and silver ink printing, printed out of the effect of more metal texture.

UV process: is a printed on the pattern you want to wrap a layer of varnish above. Mainly to increase product brightness and artistic effect, to protect the product surface, its high hardness, Flyers Printing corrosion resistance, not easy to scratches and so on.

So many kinds of printing process, only to print out the magnificent publicity leaflets and brochures, is not it amazing


Contact Us

Imee Group Ltd Professional Printer
Cathy Chen (CEO)
Pho: +86-571-81763569,+86-571-81819201
Fax:+86-571-87641610
E-Mail: imeeprint@163.com

Skype: imeechina6868cathylchen
Addr: 7th Floor, No.99 Meiyuannanlu, Zhuantang, Westlake district, Hangzhou, ZJ ,310024, China

Copyright © Imee Group Ltd